Your IP: Unknown · Your Status: Unprotected Protected

Warning alert The L2TP and PPTP protocols are becoming obsolete. Therefore, as of Dec. 1st, 2018, NordVPN will no longer support them. We recommend OpenVPN or IKEv2/IPSec.


This is a tutorial on how to connect a Draytek router via PPTP.

First things first, these changes are made in the web configuration panel of your router. You can access it by visiting the local IP of your router from your web browser. The two most common, default local IPs that most routers have are or – you can access these by opening or in your browser. The default IP, username and password are listed in your router’s User Manual.

Please note that PPTP is a very old VPN protocol, and is considered unsafe. Please use it at your own risk.

1. Open the VPN and Remote Access menu;
2. Go to Lan to Lan submenu;
3. In order to create a new VPN profile. click on an empty entry;
4. Change these settings in 1. Common Settings menu:
Profile Name can be set to anything you like. I would recommend naming it as NordVPN;
Enable this profile option should be enabled;
• Change Call direction to Dial-out;
• Enable Always on feature;
5. Change these settings in 2. Dial-out Settings menu:
• Select PPTP as Type of Server I am calling;
• Into Server IP/Host Name for VPN field enter the address the server you want to connect to. Our server list can be found here: ;
• Enter your NordVPN Username and Password into corresponding fields;
• Set PPP Authentication to PAP/CHAP;
6. Change these settings in 4. TCP/IP Network Settings menu:
• Set RIP Direction to Disabled;
 “From first subnet to remote network, you have to do” should be changed to NAT;
• Enable Change default route to this VPN;
7. Click OK to finish the VPN setup.
8. Go to VPN and Remote Access -> Connection Management;
9. Click Dial to establish VPN.

Congratulations, your traffic should be going through NordVPN now! You can visit to confirm the successful VPN connection.